struct const class std::DateTime

sys::Obj
  std::DateTime

@Serializable { simple=true }
@NoPeer

DateTime represents an absolute instance in time. Fantom time is normalized as nanosecond ticks since 1 Jan 2000 UTC with a supported range of 1901 to 2099. Fantom time does not support leap seconds (same as Java and UNIX). An instance of DateTime also models the date and time of an absolute instance against a specific TimeZone.

Also see docLang.

compare

virtual override Int compare(Obj that)

Compare based on nanosecond ticks.

date

Date date()

Get the date component of this timestamp.

day

Int day()

Get the day of the month as a number between 1 and 31.

dayOfYear

Int dayOfYear()

Return the day of the year as a number between 1 and 365 (or 1 to 366 if a leap year).

defVal

const static DateTime defVal := ...

Default value is "2000-01-01T00:00:00Z UTC".

dst

Bool dst()

Return if this time is within daylight savings time for its associated time zone.

equals

virtual override Bool equals(Obj? that)

Two times are equal if have identical nanosecond ticks.

floor

DateTime floor(Duration accuracy)

Return a new DateTime with this time's nanosecond ticks truncated according to the specified accuracy. For example floor(1min) will truncate this time to the minute such that seconds are 0.0. This method is strictly based on absolute ticks, it does not take into account wall-time rollovers.

fromHttpStr

static DateTime? fromHttpStr(Str s, Bool checked := true)

Parse an HTTP date according to the RFC 2616 section 3.3.1. If invalid format and checked is false return null, otherwise throw ParseErr. The following date formats are supported:

Sun, 06 Nov 1994 08:49:37 GMT  ; RFC 822, updated by RFC 1123
Sunday, 06-Nov-94 08:49:37 GMT ; RFC 850, obsoleted by RFC 1036
Sun Nov  6 08:49:37 1994       ; ANSI C's asctime() format
fromIso

static DateTime? fromIso(Str s, Bool checked := true)

Parse an ISO 8601 timestamp. If invalid format and checked is false return null, otherwise throw ParseErr. The following formats are supported:

YYYY-MM-DD'T'hh:mm:ss[.FFFFFFFFF]
YYYY-MM-DD'T'hh:mm:ss[.FFFFFFFFF]+HH:MM
YYYY-MM-DD'T'hh:mm:ss[.FFFFFFFFF]-HH:MM

If a timezone offset is specified, then one the predefined "Etc/GMT+x" timezones are used for the result:

DateTime("2009-01-15T12:00:00Z")       =>  2009-01-15T12:00:00Z UTC
DateTime("2009-01-15T12:00:00-05:00")  =>  2009-01-15T12:00:00-05:00 GMT+5

Also see toIso, fromStr, and fromHttpStr.

fromJava

static DateTime? fromJava(Int millis, TimeZone tz := TimeZone.cur(), Bool negIsNull := true)

Create date for Java milliseconds since the epoch of 1 Jan 1970 using the specified timezone (defaults to current). If millis are less than or equal to zero then return null.

fromLocale

static DateTime? fromLocale(Str str, Str pattern, TimeZone? tz := TimeZone.cur(), Bool checked := true)

Parse a string into a DateTime using the given pattern. If string is not a valid format then return null or raise ParseErr based on checked flag. See toLocale for pattern syntax.

The timezone is inferred from the zone pattern, or else the given tz parameter is used for the timezone. The z pattern will match "hh:mm", "hhmm", or "hh". If only a zone offset is available and it doesn't match the expected tz parameter, then use a "GMT+/-" timezone. Note that if offset is a fractional hour such as GMT-3:30, then result will have ticks, but its tz will be floored hour based GMT timezone such as GMT-3.

fromStr

static new fromStr(Str s, Bool checked := true, Bool iso := false)

Parse the string into a DateTime from the programmatic encoding defined by toStr. If the string cannot be parsed into a valid DateTime and checked is false then return null, otherwise throw ParseErr. Also see fromIso and fromHttpStr.

fromTimePoint

static DateTime fromTimePoint(TimePoint tp, TimeZone tz := TimeZone.cur())

hash

virtual override Int hash()

Return nanosecond ticks for the hashcode.

hour

Int hour()

Get the hour of the time as a number between 0 and 23.

hoursInDay

Int hoursInDay()

Return the number of hours for this date and this timezone. Days which transition to DST will be 23 hours and days which transition back to standard time will be 25 hours. Note there one timezone "Lord_Howe" which has a 30min offset which is not handled by this method (WTF).

httpFormats

const static List<Str> httpFormats := ...

isLeapYear

static Bool isLeapYear(Int year)

Return if the specified year is a leap year.

isMidnight

Bool isMidnight()

Return if the time portion is "00:00:00".

make

static DateTime make(Int year, Month month, Int day, Int hour, Int min, Int sec := 0, Int ns := 0, TimeZone tz := TimeZone.cur())

Make for the specified date and time values:

  • year: 1901-2099
  • month: Month enumeration
  • day: 1-31
  • hour: 0-23
  • min: 0-59
  • sec: 0-59
  • ns: 0-999_999_999
  • tz: time zone used to map date/time to ns ticks

Throw ArgErr is any of the parameters are out of range.

midnight

DateTime midnight()

Return a DateTime for the beginning of the current day at midnight.

min

Int min()

Get the minutes of the time as a number between 0 and 59.

minus

@Operator
DateTime minus(Duration duration)

Subtract a duration to compute a new time. This method works off absolute time, so subtracting 1days means to subtract 24 hours from the ticks. This might be a different time of day if on a DST boundry. Use Date.minus for daily increments.

Example:

prevHour := DateTime.now - 1hr
minusDateTime

@Operator
Duration minusDateTime(DateTime time)

Return the delta between this and the given time.

Example:

elapsed := DateTime.now - startTime
month

Month month()

Get the month of this date.

nanoSec

Int nanoSec()

Get the number of nanoseconds (the fraction of seconds) as a number between 0 and 999,999,999.

now

static DateTime now(Duration? tolerance := 250.ms)

Return the current time using TimeZone.cur. The tolerance parameter specifies that you are willing to use a cached DateTime instance as long as (now - cached <= tolerance). If tolerance is null, then this method always creates a new DateTime instance. Using tolerance can increase performance and save memory. The tolerance default is 250ms.

If you are using time to calculate relative time periods, then use Duration.now instead. Duration is more efficient and won't cause you grief when the system clock is modified.

nowUtc

static DateTime nowUtc(Duration? tolerance := 250.ms)

Return the current time using TimeZone.utc. See now for a description of the tolerance parameter.

plus

@Operator
DateTime plus(Duration duration)

Add a duration to compute a new time. This method works off absolute time, so adding 1days means to add 24 hours to the ticks. This might be a different time of day if on a DST boundry. Use Date.plus for daily increments.

Example:

nextHour := DateTime.now + 1hr
sec

Int sec()

Get the whole seconds of the time as a number between 0 and 59.

time

TimeOfDay time()

Get the time component of this timestamp.

toCode

Str toCode()

Get this DateTime as a Fantom expression suitable for code generation.

toHttpStr

Str toHttpStr()

Format this time for use in an MIME or HTTP message according to RFC 2616 using the RFC 1123 format:

Sun, 06 Nov 1994 08:49:37 GMT
toIso

Str toIso()

Format this instance according to ISO 8601 using the pattern:

YYYY-MM-DD'T'hh:mm:ss.FFFz

Also see fromIso, toStr, and toHttpStr.

toJava

Int toJava()

Get this date in Java milliseconds since the epoch of 1 Jan 1970.

toLocale

Str toLocale(Str? pattern := null, Locale locale := Locale.cur())

Format this time according to the specified pattern. If pattern is null, then a localized default is used. Any ASCII letter in the pattern is interpreted as follows:

YY     Two digit year             07
YYYY   Four digit year            2007
M      One/two digit month        6, 11
MM     Two digit month            06, 11
MMM    Three letter abbr month    Jun, Nov
MMMM   Full month                 June, November
D      One/two digit day          5, 28
DD     Two digit day              05, 28
DDD    Day with suffix            1st, 2nd, 3rd, 24th
WWW    Three letter abbr weekday  Tue
WWWW   Full weekday               Tuesday
V      One/two digit week of year 1,52
VV     Two digit week of year     01,52
VVV    Week of year with suffix   1st,52nd
h      One digit 24 hour (0-23)   3, 22
hh     Two digit 24 hour (0-23)   03, 22
k      One digit 12 hour (1-12)   3, 11
kk     Two digit 12 hour (1-12)   03, 11
m      One digit minutes (0-59)   4, 45
mm     Two digit minutes (0-59)   04, 45
s      One digit seconds (0-59)   4, 45
ss     Two digit seconds (0-59)   04, 45
SS     Optional seconds (only if non-zero)
f*     Fractional secs trailing zeros
F*     Fractional secs no trailing zeros
a      Lower case a/p for am/pm   a, p
aa     Lower case am/pm           am, pm
A      Upper case A/P for am/pm   A, P
AA     Upper case AM/PM           AM, PM
z      Time zone offset           Z, +03:00 (ISO 8601, XML Schema)
zzz    Time zone abbr             EST, EDT
zzzz   Time zone name             New_York
'xyz'  Literal characters

A symbol immediately preceding a "F" pattern with a no fraction to print is skipped.

Examples:

YYYY-MM-DD'T'hh:mm:ss.FFFz  =>  2009-01-16T09:57:35.097-05:00
DD MMM YYYY                 =>  06 Jan 2009
DD/MMM/YY                   =>  06/Jan/09
MMMM D, YYYY                =>  January 16, 2009
hh:mm:ss.fff zzzz           =>  09:58:54.845 New_York
k:mma                       =>  9:58a
k:mmAA                      =>  9:58AM
toRel

DateTime toRel()

Convenience for toTimeZone(TimeZone.rel). See docLang.

toStr

virtual override Str toStr()

Return programmatic string encoding formatted as follows:

"YYYY-MM-DD'T'hh:mm:ss.FFFFFFFFFz zzzz"

See toLocale for the pattern legend. The base of the string encoding conforms to ISO 8601 and XML Schema Part 2. The Fantom format also appends the timezone name to avoid the ambiguities associated with interpretting the time zone offset. Also see toIso and toHttpStr.

Examples:

"2000-04-03T00:00:00.123Z UTC"
"2006-10-31T01:02:03-05:00 New_York"
"2009-03-10T11:33:20Z London"
"2009-03-01T12:00:00+01:00 Amsterdam"
toTimePoint

TimePoint toTimePoint()

toTimeZone

DateTime toTimeZone(TimeZone tz)

Convert this DateTime to the specific timezone. The absolute point time as ticks remains the same, but the date and time fields will be converted to represent the new time zone. However if converting to or from TimeZone.rel then the resulting DateTime has the same day and time. Also see toUtc and toRel.

Example:

dt := DateTime("2010-06-03T10:30:00-04:00 New_York")
dt.toUtc  =>  2010-06-03T14:30:00Z UTC
dt.toRel  =>  2010-06-03T10:30:00Z Rel
toUtc

DateTime toUtc()

Convenience for toTimeZone(TimeZone.utc).

tz

TimeZone tz()

Get the time zone associated with this date time.

tzAbbr

Str tzAbbr()

Get the time zone's abbreviation for this time. See TimeZone.stdAbbr and TimeZone.dstAbbr.

weekOfYear

Int weekOfYear(Weekday startOfWeek := Weekday.localeStartOfWeek())

Return the week number of the year as a number between 1 and 53 using the given weekday as the start of the week (defaults to current locale).

weekday

Weekday weekday()

Get the day of the week for this time.

weekdayInMonth

static Int weekdayInMonth(Int year, Month mon, Weekday weekday, Int pos)

This method computes the day of month (1-31) for a given weekday. The pos parameter specifies the first, second, third, or fourth occurence of the weekday. A negative pos is used to compute the last (or second to last, etc) weekday in the month.

Examples:

// compute the second monday in Apr 2007
weekdayInMonth(2007, Month.apr, Weekday.mon, 2)

// compute the last sunday in Oct 2007
weekdayInMonth(2007, Month.oct, Weekday.sun, -1)
year

Int year()

Get the year as a number such as 2007.